  | 
                      CEA Stainless  steel threaded centrifugal pumps
                      
                        Wide range of stainless steel pumps for  domestic and industrial applications. 
                          Available on request: “V” version with FPM  seals for temperatures up to 110°C and “N” version completely made of AISI 316  stainless steel. 
                        
                                                  SPECIFICATIONS 
                         
                        
                          - Delivery: up to 31 m³/h
 
                          - Head: up to 30 m
 
                          - Power supply: both single and three-phase 50 and 60       Hz
 
                          - Power: from 0.37 kW up to 3 kW
 
                          - Maximum operating pressure: 8 bar
 
                          - Temperature of pumped liquid: from -10 °C to 110 °C
 
                          | 
                    
                    
                        | 
                      CO  Threaded centrifugal pumps with open impeller
                        These pumps combine the advantages of an  open impeller with those of the AISI 316 stainless steel construction, which is  particularly suited for handling moderately aggressive liquids with suspended  solids. 
                        
                                                  SPECIFICATIONS 
                         
                        
                          - Delivery: up to 54 m³/h
 
                          - Head: up to 24 m
 
                          - Power supply: both single and three-phase 50 and 60       Hz
 
                          - Power: from 0.37 kW up to 3 kW
 
                          - Maximum operating pressure: 8 bar
 
                          - Temperature of pumped liquid: from -10 °C to 120 °C
 
                          - Free passage: up to 20 mm
 
                          | 
                    
                    
                        | 
                      SHE SHF SHS Stainless  steel 316 end suction pumps 
                         e-SH Series 
                        The Lowara e-SH series is a single impeller centrifugal pump made in  AISI 316 stainless steel making it the right pump for moving water and  aggressive liquids in a vast number of applications where high chemical  resistance is needed. 
                          HIGH EFFICIENCY  AND LOW OPERATION COSTS 
                          Newly designed high efficiency hydraulics with MEI values well  above the ErP2015 level and IE3 motors set the basis for very low  operation costs. Equipped with a Hydrovar variable speed pump controller, the  duty is always exactly where it should be. And it pays off: reducing the speed  by 50% reduces the power consumption by 85%. 
                          EXACTLY THE RIGHT  CONFIGURATION 
                          Pump and impellers made in AISI 316 stainless steel with choice of  mechanical seals/ motor options makes the e-SH is the right solution for 1000’s  of liquids. 
                          The e-SH is WRAS approved for potable water use. 
                        
                                                  SPECIFICATIONS 
                         
                        
                          - Delivery:       up to 240 m³/h
 
                          - Head:       up to 110 m
 
                          - Power       supply: three-phase 50 and 60 Hz
 
                          - Power:       from 0,25 kW up to 75 kW
 
                          - Temperature       of pumped liquid: from -10°C to +120°C
 
                          - Extended temperature       versions from -30°C to +120°C
 
                          | 
                    
                    
                        | 
                       e-SV Stainless Steel  Vertical Multi-stage Pumps
                        e-SV vertical multistage  pump in stainless steel 
                          The Lowara e-SV vertical multistage pump is a highly reliable and  technologically advanced multipurpose pump. It’s capable of satisfying the  needs of a wide variety of users and many different construction designs are  available. The e-SV range feature models in eleven sizes with  1-3-5-10-15-22-33-46-66-92-125 m³/h nominal capacities. 
                          DESIGN FEATURES 
                        
                          - Balanced       mechanical seal replaceable without need for pump disassembling (for       10-15-22SV>=5,5kW, 33-46-66-92-125SV)
 
                          - “O”       Ring seat design to allow for simple outer sleeve dis-assembly
 
                          - Floating       for self-alignment replaceable diffuser wear ring (PPS Glass filled       tecnopolymer to withstand chemically corrosive, mechanically aggressive       and high temperature liquids)
 
                          - Reduced       impeller axial thrust for longer standard motor bearing life (17,500h)
 
                          - Hard       Material Intermediate bush bearing (Tungsten Carbide/Silicon Carbide) to       improve life and ability to withstand heavy duty applications, like boiler       feeding
 
                          - High       temperature seal option (180°C max) with low NPSH design, high pressure       design (up to 40 Bar), and passivized & electro-polished versions are       available upon request.
 
                         
                        Further unique features of the e-SV include the integration of  performance diagnostic devices such as the i-Alert™ vibration monitor and Dry  Run sensor. The i-Alert™ and the Dry Run sensor are available as an accessory  for all models. 
                          The e-SV is certified by WRAS, ACS and D.M. 174 for use with potable  water. 
                        
                           
                            VERSIONS 
                         
                        
                          - e-SV:       standard pump with IE3 motor
 
                          - e-SVE:       Variable speed Smart Pump with ultra-premium efficiency IES2 drive package       including a permanent magnet IE5 motor (up to 1,5 kW)
 
                          - e-SVH:       Variable speed pump with Hydrovar pump controller (up to 22 kW)
 
                         
                        
                          SPECIFICATIONS 
                         
                        
                          - Delivery:       up to 160 m³/h
 
                          - Head:       up to 330 m
 
                          - Power       supply: both single and three-phase 50 and 60 Hz
 
                          - Power:       from 0.37 kW up to 55 kW
 
                          - Maximum       operating pressure: 40 bar
 
                          - Temperature       of pumped liquid: from -30°C to 120°C (high temperature version up       to 180°C available)
 
                          | 
                    
                    
                        | 
                      BG  Self-priming centrifugal pumps
                      
                        
                          Self-priming close-coupled centrifugal pumps with built-in ejector  system, designed to remain primed even in the presence of water-dissolved  gases. The extensive use of pressed stainless steel ensures  a high-performance, durable and lightweight pump. Suitable for use with  drinking water. 
                            BG Garden version: including handle, cable with plug and terminal box  with incorporated switch. 
                           
                            SPECIFICATIONS 
                         
                        
                          
                            - Delivery:       up to 4.20 m³/h
 
                            - Head:       up to 53 m
 
                            - Power       supply: both single and three-phase 50 and 60 Hz
 
                            - Power:       from 0.37 kW up to 1.10 kW
 
                            - Maximum       operating pressure: 8 bar
 
                            - Temperature       of pumped liquid: from -10 °C to 40 °C
 
                           
                          | 
                    
                    
                        | 
                      SP Self-Priming pumps with liquid side channel and  star impeller
                        Close-coupled self-Priming pumps with  liquid side channel and star impeller. Designed to remain primed even in the  presence of water-dissolved gases or when the suction line is not filled with  liquid. The Nickel-plated brass impeller avoids possible jamming due to  oxidation. 
                        
                                                  SPECIFICATIONS 
                         
                        
                          - Delivery: up to       2.75 m³/h
 
                          - Head: up to 50 m
 
                          - Power supply:       both single and three-phase 50 and 60 Hz
 
                          - Power: from 0.55       kW up to 0.75 kW
 
                          - Maximum       operating pressure: 8 bar
 
                          - Temperature of       pumped liquid: from -10 °C to 40 °C
 
                          | 
                    
                    
                        | 
                      DOMO Series  
                        DOMO series, stainless steel electric  pumps, are available with twin-channel or vortex impeller (DOMO VX). 
                          Designed to handle suspended solids up to 50mm in diameter (35 mm for DOMO 7  and DOMO 7VX). 
                          Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power. 
                          Versions with or without float switch are available. DRIVELUB SEAL SYSTEM. 
                        
                                                  SPECIFICATIONS
                           
                         
                        
                          - Flow: up to 40       m³/h
 
                          - Head: up to 14.5       m
 
                          - Power supply:       both single and three-phase 50 and 60 Hz
 
                          - Power: from 0.55       kW up to 1.50 kW
 
                          - Temperature of       pumped liquid: to 35 °C
 
                          - Maximum       immersion depth: 5 m
 
                          - Free       passage: up to 50 mm 
 
                          |